Jinghong plastic adheres to the principle of "people-oriented, creating value; honest and pragmatic, improvement and innovation" as the soul of the enterprise, providing customers with high-quality and reasonable price of plastic raw materials. The company will continue to good reputation, adequate supply to seek greater development, create a win-win situation. We are willing to sincerely cooperate with friends from all walks of life, develop together, make progress together, and create brilliance hand in hand!
PC的主要生产厂家
PC是上世纪60年代发展起来的工程塑料,目前**主要厂家有德国拜耳的Makrolon PC、美国SABIC的Lexan PC、日本出光Tarflon PC、日本三菱的Iupilon PC、日本帝人的Panlite PC,日本住友化学 PC,韩国LG PC,荷兰 PC,等。但是国内自主PC产能一直较小,如宁波大风,山东鲁西化工,中石化三菱化学等,目前国内的主要为中外合资建设,如拜耳与上海华谊集团在上海化工园区投资生产线,日本帝人在浙江嘉兴建设。中国台湾地区有中国台湾奇美PC,中国台湾台化出光PC,中国台湾盛禧奥(斯泰隆)PC等。
帝人PC挤出成型工艺参数
工艺条件 聚碳酸酯 玻纤增强PC 工艺条件 聚碳酸酯 玻纤增强PC
料筒温度/℃ 后部 250 240 模芯外径/mm 26 26
前部 255 250 长径比 24 24
喷嘴温度/℃
后部 230 220 管材内径/mm 25.5 25.8
前部 220 215 管材外径/mm 32.8 32.9
口模温度/℃
210 225 真空定径器内径/mm 33 33
螺杆转速/(r/min) 10.5 10.5 定径器与口模间隙 20 20
模套内径/mm 33 26 冷却水温度/℃ 80 80
PC成型性能 :
1.无定形料,吸湿小,不须充分干燥,不易分解,但热膨胀系数大,易产生内应力.流动性较好,可用螺杆或柱塞式机成型.
2.宜用高料温,高模温,低压力,延长时间有利于降低内应力,防止缩孔.变形.
3.可用各种形式浇口,浇口与塑件圆弧连接,以免去处浇口时损坏塑件.脱模斜度大,**出均匀.塑件壁厚均匀,不带镶件,如有镶件应预热.
帝人PC注塑成型工艺参数
工艺 数值 工艺参数 数值
料筒温度/℃ 前部 270-300 压力/Mpa 6-14
中部 270-300 螺杆转速/(r/min) 30-120
后部 240-280 螺杆背压 0-10
喷嘴温度/℃ 270-300 成型周期/S 1-25
模具温度/℃ 70-100 冷却 5-40